![]() ![]() Note also that two programs cannot share the COM port. Note that if you have a 7300, you can use them and there are settings for their functions in the 7300’s Connectors menu. The 20M PSK31 calling frequncy, 14.070 MHz, is a good frequency to use for testing because it tends to be active. In your rig control software settings, pick the first COM port and set it to 19200, N, 8, 1, and CTS/RTS doesn’t matter I set them to Forced Off. Under Configuration > Rig use these settings.Īt this point you should be able to see activity in the Fldigi waterfall (ASSuming there is anyone on frequency), and you should be able to transmit from within the program. Note: If the radio is not connected and powered on, the USB Audio CODEC option will not be visible.Ĩ. Click Save before you move to the next step. Connect the USB cable, then power on the IC-7100. See page 43 of the Icom 7200 Instruction Manual for details.ħ.In Fldigi, under Configuration > Audio > Devices, select PortAudio, then USB Audio CODEC for both Capture and Playback. RIG > FLRIG > Enable flrig xcvr control with fldigi as client > Save. Make sure that the radio is in Data mode, and make sure that Data mode is set to U, so that it accepts audio and CAT commands through the USB port. Connect and power on the radio to your computer using the USB cable. Download and install the latest version of Fldigi.Ħ. Download and install the Hamlib radio control libraries.ĥ. ![]() Connect the radio after you install and reboot the Mac.Ĥ. Note: Do not connect the radio to your Mac when you install the driver. You need to install the driver for the Silicon Labs CP210 USB-to-UART bridge, which is what provides the brains for the USB-B port on the back of the radio. Make sure the OS is up to date by running OS X’s Software Update.ģ. The IC7200 has a built in sound card, and the USB cable will provide both rig control and audio input/output through the one cable.Ģ. Get yourself a plain USB-A to USB-B cable, as used with most recent computer printers. Ray, W3PRR, asked me for help on configuring Fldigi running on a Mac with OS 10.9.4 so that it can control an Icom 7200 radio. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |